|
|
|
|
|
|
1 |
V-Guard products |
VG4C-Plus - VG4C-XP |
4 Channel Video, 4 Channel Audio |
|
2 |
Video Signal |
Composite Signal (Video in : BNC Jack) |
|
3 |
Audio in |
RCA jack |
|
|
Video Resolution |
VG4C-Plus |
VG4C-XP |
VG4VC-RT |
|
4 |
NTSC |
640 x 480 Pixel |
320 x 240 Pixel |
640 x 480 Pixel |
640 x 480 Pixel |
|
|
PAL |
704 x 576 Pixel |
352 x 288 Pixel |
704 x 576 Pixel |
704 x 576 Pixel |
|
5 |
Maximum recording and Monitoring speed
(Monitoring / Recording /Simultaneously) |
Max recordinhg and monitoring speed
(Frame / Second) |
VG4C-Plus |
VG4C-XP |
VG4C-RT |
| |
|
|
NTSC |
PAL |
NTSC |
PAL |
NTSC |
PAL |
| |
|
1 port |
30fps |
25fps |
30fps |
25fps |
30fps |
25fps |
| |
|
4 ports |
60fps |
50fps |
60fps |
50fps |
120fps |
100fps |
|
|
|
8 ports |
120fps |
100fps |
120fps |
100fps |
240fps |
200fps |
|
|
|
16 ports |
160fps |
133fps |
240fps |
200fps |
480fps |
400fps |
|
6 |
Image compression tecnology |
SMICT (Super Motion Image Compression
Tecnology) Background and foreground separation tecnology. |
|
7 |
Image compression rate |
Dynamic compression – rate = 40:1 ~ 2400:1.
(Automatic changes depends on the image’s moving situation |
|
8 |
Image motion detection |
Depends on the movement of detected images
to activate recording and image compression, and to trigger the alarm
function. |
|
9 |
Watch Dog |
Automatic restarts the computer and run
Chateau program at the set time when the system fails. |
|
|
Software Function |
ChateauX / ChateauXP |
|
1 |
Recording Mode |
Normal recording mode, recycle recording
mode, program recording mode (Schedule recording per each camera) |
|
2 |
Recording and Monitoring Mode |
Full Screen Mode, Full screen recording with
detection area alarm triggering mode. Detection area triggering
recording and alarm mode. |
|
3 |
Monitoring Mode |
Normal monitoring mode, Monitoring with
detection area alarmtriggering mode, Monitoring with detectionarea
triggering recordingand alarm mode. |
|
4 |
Auto Scan |
Under Recording and Monitoring mode and
Monitoring mode, automatic enlargement of 1 camera image each time for
better monitoring. Other cameras still under recording mode. |
|
5 |
Recording File Length |
Adjustable file length:
Chateau X: Min 10 minutes, max 999
minutes
Chateau XP: Min 10 minutes, max 120 minutes |
|
6 |
Number opf image Saving Hard disk
|
Support all hard disks plugged in the
computer. |
|
7 |
Alarm Function |
Motion image trigger alarm, sensor input
trigger alarm, and video tost trigger alarm. |
|
8 |
Motion image Sensitivily |
Adjustable image sensitivily to trigger the
alarm |
|
9 |
Image Variation Setting |
Adjustable the variation of the images for
effective alarm triggering. |
|
10 |
Multi Mask Area Setting |
Each camera can be set with multi mask area.
Unlimeted mask area for each camera |
|
11 |
Alert Alarm |
Each camera can be self-defined: Sound alert
and its alarm sound, activate recording , and change recording speed,
snapshot and remote alert. |
|
12 |
Alarm Log |
Will record the alarm activate time, and to
chose the recorded time and playback image directly. |
|
13 |
Mult-task Capability |
Recording, playback, remote monitoring and
image view at the same time. |
|
14 |
Snapshot |
Snapshot at recording and monitoring,
monitoring remote recording, monitoring, and playback. (Can record the
snapshot time and camera name.) |
|
15 |
Audio Recording |
24K bps ADPCM audio recording mode.
VG4C-Plus / XP supports a maximum of 9 ports audio recording, which 8
ports from 8 cameras and 1 port from the mic-in input on the sound card.
VG4C-RT supports a maximum of 16 ports audio recording. Simultaneously
with Video recording. |
|
16 |
Authorization Setting |
The System Supervisor can set authorization. |
|
17 |
Individually confidential function for
each recorded image |
Each camera can set screen confidentiality
individually to hide the camera at the some important points. System
supervisor can set the needs and authorizations for different users for
local or remote uses and monitoring for confidential purpose. |
|
18 |
PTZ / Dome function |
Direct control the dome under the system to
move up, down, left, right, room in / out, iris and focus, preset point
setting and control, auto panfunction, and the cruise function.
|
|
19 |
I/O Control |
Provide mult input / output for I/O control. |
|
20 |
E-Map |
Provide controllable e-map to locate the
cameras. |
|
21 |
Trigger / Camera Location /
Capture |
Combine the sensor input trigger alarm
function with Dome’s preset point alarm capture images. |
| |
|
.Net Virtual Central Integrate System |
|
1 |
Network Function |
ChateauX / ChateauXP can provide connections
for different network through LAN or internet to remote systems and also
provide one to one remote system.
ChateauXP can combine the Chateau XP Server to Server function throuth
Intranet to remote systems and also provide remote function for systems
to systems. |
|
2 |
Auto login network |
System and connect the Chateau server
through LAN or Internet and to select to login manually or automatically. |
|
3 |
Remote Search Function |
To search for the images information,
snapshots and printing function from the far end hard disk. |
|
4 |
Remote Live Image |
Remote access and record the live image from
the other hos system and the remote site can also record images.
|
|
5 |
Remote Control |
To remote control PTZ, Output Port and to
set the remote alarm detective area, recording snapshot, activate or
disarm the alarm. |
|
|
|
Telephone: Sound Alarm |
Mobile Phone:
Sound Alarm |
Pager: Number |
|
6 |
Remote Alarm Function (Each camera
can be set individually) |
Automatically alarm the remote and Chateau
System: Image transmission, sound alarm, and messages. Under PSTN
(modem) condition, will automatically alert other host using Telephone.
Under TCP/IP condition (LAN, Internet, Intranet). Will automatically
alert the host (Images and Sound) |
|
7 |
Remote control transmission |
Transmission through PSTN (56K Modem) – LAN
– Internet – Intranet (Transmission speed depends on the number of of of
transmission images and the signal condition.) |
|
Configuração mínima do Microcomputador: Pentium IV
1.8 Ghz (o RT = 2,0), Monitor LG de 15", Cooler c/ rolamento, Placa mãe
Intel D850MV, Memória RAMBUS c/ 256 Mbytes, Placa de vídeo Geforce 2 -
64 Mbytes AGP, Placa de som on board, Placa de rede Genius 10/100M, Fax
modem Lucent 56K V.90 voice, HD Quantum / Maxtor 40 Gbytes, Drive de
CD-Room LG 52X, Floppy Driver Mitsumi 1.44, Gabinete ATX c/ fonte 300W,
Teclado PS/2, Mouse PS/2, Caixa de som Genius, sistema
operacional Windows 2000 / XP. |
